Close-up of a hand-cut mitered corner with rivets on a seamless gutter

Home · Compare Quotes

Comparing gutter quotes

Two quotes, same footage,
very different jobs.

Ask both yourself and the competing company the questions on this page. The answers are where the price difference usually lives.

Licensed (LA-010010 · C-5498) and insured. All installers covered by Worker’s Compensation — no exempt subcontractors.

Why the numbers differ

Footage is the easy part. The rest is not.

Two companies can quote the same number of linear feet on the same house and be describing genuinely different jobs. The gutter itself is the cheapest part of the install — what changes the price is the hardware holding it up, how the corners are made, and who ends up on the ladder.

None of this is a reason to assume the cheaper quote is bad. It is a reason to make sure you are comparing the same thing. If a competing quote answers all six of these the way ours does and still comes in lower, take it.

Where the difference hides

Hanger gauge and spacing

23¢ vs 75¢ each, 30" vs 4ft apart

Miter type

Hand-cut and riveted vs strip or box

Endcap finish

Factory baked-on vs painted on site

Splash blocks

Included, or quoted as an extra

Who installs

The estimator, or a crew who never saw the job

The six questions

Ask these six. Ours are answered here.

01

Is the quoted gutter footage the same as the number of spouts?

Companies may have different ideas and gutter configurations. Make sure you are comparing apples to apples.

OUR ANSWER

We count the corners and the spouts with you at the estimate, so the number on the page matches the roof you actually have.

02

Does the quote include concrete splash blocks under each spout?

Plenty of quotes leave these off and add them later, or simply do not fit them.

OUR ANSWER

Ours includes a concrete splash block under every single downspout, as standard.

03

Is the company using heavy-duty hangers with a built-in screw?

This matters because the cost of hangers varies greatly. A normal 6" light-duty hanger is about 23 cents each; a heavy-duty hanger with a built-in screw costs around 75 cents each.

OUR ANSWER

We use the heavy-duty hanger and space them at approximately 30". Some companies space them as much as 4 feet apart.

04

Are the miters single-seam hand-cut, strip, or box miters?

A strip or box miter is quicker to fit. A hand-cut miter is measured and made for that specific corner.

OUR ANSWER

We hand-cut each miter to exact measurements, fasten them with five rivets, and caulk the inside using a heavy-duty caulk. We prefer rivets over screws because they sit flat, do not rust, and look nicer.

05

Are the endcaps color-matched with the same baked-on enamel finish?

Many companies use white endcaps and paint them on the job site as needed. Site-painted endcaps do not look as good and tend to fade rather quickly.

OUR ANSWER

Ours come from the same factory, using the same baked-on paint process as the gutter and downspouts.

06

Who is actually doing the gutter installation?

On a lot of jobs the person who quotes it is a salesperson, and the crew who turn up have never seen the property.

OUR ANSWER

Our estimators are also the installers. The estimator/installer can go over the job in detail with you, which reduces the chance of any miscommunication on the day.

Side by side

The same six points, laid out flat.

A TYPICAL QUOTEAMERICAN CUSTOM GUTTERING
HangersLight-duty, ~23¢, spaced up to 4ftHeavy-duty with built-in screw, ~75¢, spaced ~30"
MitersStrip or box, fitted quicklyHand-cut to the corner, five rivets, caulked inside
FixingsScrewsRivets — sit flat, do not rust
EndcapsOften white, painted on siteFactory baked-on enamel, color-matched
Splash blocksSometimes an extraOne under every downspout, included
Who installsA crew who never saw the jobThe estimator who quoted it

On the day

Five more worth asking whoever turns up.

How long has your company been in business?

Since 1991 — over 34 years, locally owned and based in Odessa.

Are you licensed?

We are licensed in the counties that require it. In Pasco County our license is SAC-08571 and in Pinellas it is C-5498. Hillsborough and Hernando do not currently require a gutter license.

Are your installers employees or subcontractors?

All of our estimator/installers are our own employees.

Are your employees covered by Worker’s Compensation?

Yes, and we can provide a certificate on request.

Are any of your installers exempt from Worker’s Compensation?

No. Exempt workers put too much risk on the homeowner — an injured person without cover may try to claim against your homeowner’s policy.

Free gutter estimate

Tell us about your roofline.

Send the details and we will come out, measure, and walk the job with you. The person who gives you the number is the person who will be on the ladder.

HOURS
Mon – Fri, 7:00am – 3:00pm

WHERE WE INSTALL

Odessa · Land O’ Lakes · Trinity · New Port Richey · Wesley Chapel · Hudson · San Antonio · Zephyrhills · Tarpon Springs · Palm Harbor · Clearwater · Dunedin · Oldsmar · Tampa · Lutz · Westchase · Citrus Park · Brooksville · Spring Hill · Weeki Wachee

Licensed & insured

LA-010010 · C-5498

Worker’s Comp

No exempt installers

Warranty

2 yr work · 20 yr material

Request an estimate

Or call us on 813-926-6366